Products

Ballast Fender

Ballast Fender

The inflatable fender that stays down in the wind: 5 l of water ballast keep it vertical. DAME Design Award 2026 Special Mention.

The Ballast Fender stays where you hang it. Up to 5 litres of water in a separate sealed tank at its base keep it vertical against the hull: gusts, wash and swell no longer lift it onto the deck. Air above, water below, in two chambers; it floats even with the tank full and, empty, rolls up small. Ø 30 cm, lengths 74 and 106 cm (FDW-101, FDW-102). Patent pending. Special Mention, DAME Design Award 2026. New for 2027.
Read more

Fold self-standing bimini

Fold self-standing bimini

Self-standing bimini that opens and closes in one move, with no stays or ties on deck. DAME Design Award 2026 nominee.

Fold opens and closes your bimini in one move: the patent-pending arms swing out, the cover unfolds and stays taut with no stays or lines on deck; the same move folds it back aft, compact and tidy. One person, a few seconds. Ø 25 mm AISI 316 tube, UV-resistant acrylic fabric, widths 200 to 270 cm in grey, blue, beige and red, with or without roll bar. Made to measure for shipyards. DAME Design Award 2026 nominee. From February 2027.
Read more

Flipper foldable winch handle (FS-101-1)

Flipper foldable winch handle (FS-101-1)

The world's first foldable winch handle: it stays on the winch, folds flat and never goes overboard. Patented.

Flipper stays on the winch and folds flat instead of being removed after every manoeuvre: no more handles lost overboard and no time wasted looking for one. Fully extended it works as a ratchet with a 314 mm lever, the longest lever arm on the market. CNC-machined aluminium 6082 with AISI 316L stainless joints, designed in Italy and used by thousands of sailors worldwide. Patented. Code FS-101-1.
Read more

Flipper Max foldable winch handle (FM-101-1)

Flipper Max foldable winch handle (FM-101-1)

Foldable winch handle with a 254 mm lever and a universal star fitting for winch sizes 45 to 70. Patented.

Flipper Max is the foldable winch handle with extended leverage: a 254 mm (10 in) lever reduces the effort on tough manoeuvres. The universal star fitting suits winch sizes 45, 46, 50, 55, 65 and 70. It stays on the winch and folds flat to clear the cockpit. CNC-milled 6082 aluminium with AISI 316L stainless joints. Patented. Code FM-101-1.
Read more

Flipper Max Carbon (FCM-101-1)

Flipper Max Carbon (FCM-101-1)

Flipper Max with a monolithic carbon-fibre shaft: the foldable winch handle for crews who count every gram.

Flipper Max Carbon is the ultralight evolution of the foldable winch handle, for racing crews and performance sailors. A monolithic carbon-fibre shaft with the same aluminium folding head and AISI 316L joints of Flipper Max: full 254 mm leverage, high stiffness, low weight, zero corrosion. Universal star fitting for winches 45 to 70; it stays on the winch and folds flat. Patented. Code FCM-101-1.
Read more

Anti-Mould Winch Cover (CWC-102GY to 104GY)

Anti-Mould Winch Cover (CWC-102GY to 104GY)

Winch cover with a breathable central mesh: blocks UV, rain and dust while air circulates, so no mould. M, L, XL.

The Anti-Mould Winch Cover shields winches from UV, salt, rain and dust. A breathable central mesh lets air circulate underneath, so mould cannot form as it does under closed covers. Quick to fit with a snug hold, made to withstand long exposure to sun and salt. Grey, in three sizes: M for winch 40 (CWC-102GY), L for winch 50 (CWC-103GY), XL for winch 70 (CWC-104GY).
Read more

Olli Ring low-friction ring (OA-101 to 105)

Olli Ring low-friction ring (OA-101 to 105)

Patented low-friction ring in CNC aluminium with a double rubber sheath that protects the deck. DAME Design Award nominee 2023.

Olli Ring is a low-friction ring in CNC-milled aluminium with marine-grade anodizing. The patented double rubber sheath protects deck and gelcoat from knocks and keeps the ring silent. Light and strong, it replaces blocks in many textile set-ups: barber haulers, furling leads, preventers, fairleads. Five sizes XS to XL (OA-101 to OA-105). Pairs with easysea Dyneema loops and soft shackles. DAME Design Award nominee 2023.
Read more

Olli Solid Ring (SRA-101 to 104)

Olli Solid Ring (SRA-101 to 104)

High-load low-friction ring: larger hole, thinner body, mirror-polished anodized aluminium, rubber-edged. DAME nominee 2023.

Olli Solid Ring is built for extreme loads: a larger central hole and a thinner body save weight while keeping high load capacity. CNC-milled aluminium with a mirror-polished finish and thick anodizing for corrosion resistance; a rubber edge prevents scratches and impacts on deck and equipment. For high-load textile set-ups. Four sizes S to XL (SRA-101 to SRA-104). DAME Design Award nominee 2023.
Read more

Olli Block snatch block (OB-102 to 104)

Olli Block snatch block (OB-102 to 104)

One-piece snatch block in technopolymers: no side plates, no lubrication, deck-friendly edge. DAME Design Award nominee 2024.

Olli Block is a snatch block made in one piece from technopolymers and superpolymers, Solef PVDF and Delrin 100ST: no side plates to break, sealed moving parts, no lubrication. It opens to load a line already under tension, and the technopolymer edge protects deck and equipment from knocks. Three sizes: S 40 x 10 mm, M 50 x 12 mm, L 60 x 14 mm (OB-102 to OB-104). Our best-selling product. DAME Design Award nominee 2024.
Read more

Olli Flex 900 M Ø50 (OF-101)

Olli Flex 900 M Ø50 (OF-101)

Modular block Ø50 with POM sheave, working load 900 kg, for 12 mm line: single, double, triple or deck-mounted.

Olli Flex 50 ST is the standard modular block for 12 mm line: POM self-lubricating sheave, 6 mm stainless omega shackle, working load 900 kg. One block replaces a drawer of fittings: hang it from its omega shackle, mount it flat on deck, or join identical blocks into a double or triple with the Conversion Kit. Self-lubricating design, no metal bearings to seize or corrode. Designed by easysea. Code OF-101.
Read more

Olli Flex 1800 L Ø60 (OF-102)

Olli Flex 1800 L Ø60 (OF-102)

Modular block Ø60 with POM sheave, working load 1,800 kg, for 14 mm line: single, double, triple or deck-mounted.

Olli Flex 60 ST is the larger modular block for 14 mm line: POM self-lubricating sheave, 8 mm stainless omega shackle, working load 1,800 kg. One block replaces a drawer of fittings: hang it from its omega shackle, mount it flat on deck, or join identical blocks into a double or triple with the Conversion Kit. Self-lubricating design, no metal bearings to seize or corrode. Designed by easysea. Code OF-102.
Read more

Olli Flex HL 1700 M Ø50 (OFH-101)

Olli Flex HL 1700 M Ø50 (OFH-101)

High-load modular block Ø50 with 6061-T6 aluminium sheave: working load 1,700 kg on 12 mm line.

Olli Flex 50 HL has a high-load 6061-T6 aluminium sheave and an 8 mm shackle that nearly double the working load on the same 12 mm line: 1,700 kg. One block replaces a drawer of fittings: hang it from its omega shackle, mount it flat on deck, or join identical blocks into a double or triple with the Conversion Kit. Self-lubricating design, no metal bearings to seize or corrode. Designed by easysea. Code OFH-101.
Read more

Olli Flex HL 3400 L Ø60 (OFH-102)

Olli Flex HL 3400 L Ø60 (OFH-102)

The strongest Olli Flex: Ø60 block with 6061-T6 aluminium sheave and 10 mm shackle, working load 3,400 kg.

Olli Flex 60 HL is the strongest block of the range: high-load 6061-T6 aluminium sheave and 10 mm shackle, working load 3,400 kg on 14 mm line. One block replaces a drawer of fittings: hang it from its omega shackle, mount it flat on deck, or join identical blocks into a double or triple with the Conversion Kit. Self-lubricating design, no metal bearings to seize or corrode. Designed by easysea. Code OFH-102.
Read more

Olli Flex Conversion Kit M (KOF-101)

Olli Flex Conversion Kit M (KOF-101)

Turns Olli Flex 50 ST into a deck-mounted block or a double or triple purchase. One kit, three set-ups.

Conversion Kit M for Olli Flex 50 ST (OF-101). Join two or three identical Olli Flex blocks into a double or triple, or bolt a block flat to the deck. One kit covers deck mount, double and triple; assembly takes a few common hand tools. AISI 316 hardware sized for the block. Code KOF-101.
Read more

Olli Flex Conversion Kit L (KOF-102)

Olli Flex Conversion Kit L (KOF-102)

Turns Olli Flex 60 ST into a deck-mounted block or a double or triple purchase. One kit, three set-ups.

Conversion Kit L for Olli Flex 60 ST (OF-102). Join two or three identical Olli Flex blocks into a double or triple, or bolt a block flat to the deck. One kit covers deck mount, double and triple; assembly takes a few common hand tools. AISI 316 hardware sized for the block. Code KOF-102.
Read more

Olli Flex Conversion Kit M HL (KOFHL-101)

Olli Flex Conversion Kit M HL (KOFHL-101)

Turns Olli Flex 50 HL into a deck-mounted block or a double or triple purchase. One kit, three set-ups.

Conversion Kit M HL for Olli Flex 50 HL (OFH-101). Join two or three identical Olli Flex blocks into a double or triple, or bolt a block flat to the deck. One kit covers deck mount, double and triple; assembly takes a few common hand tools. AISI 316 hardware sized for the block. Code KOFHL-101.
Read more

Olli Flex Conversion Kit L HL (KOFHL-102)

Olli Flex Conversion Kit L HL (KOFHL-102)

Turns Olli Flex 60 HL into a deck-mounted block or a double or triple purchase. One kit, three set-ups.

Conversion Kit L HL for Olli Flex 60 HL (OFH-102). Join two or three identical Olli Flex blocks into a double or triple, or bolt a block flat to the deck. One kit covers deck mount, double and triple; assembly takes a few common hand tools. AISI 316 hardware sized for the block. Code KOFHL-102.
Read more

Sheathed Loop in Dyneema (LS-102 to 105)

Sheathed Loop in Dyneema (LS-102 to 105)

Dyneema loop with an extra protective sheath, sized for Olli rings: S, M, L and XL.

The Sheathed Loop is a high-load textile loop in Dyneema with an additional protective sheath for longer life under heavy loads. Light, flexible and kind to decks, it is the natural partner of Olli rings and blocks for static rigging and high-load connections. Four sizes matched to the Olli range: S 14x10, M 20x14, L 28x20, XL 38x28 (LS-102 to LS-105).
Read more

Covered Loop in Dyneema (LC-101 to 103)

Covered Loop in Dyneema (LC-101 to 103)

Pre-stretched, overlapped Dyneema loop for static rigging and heavy loads, sized for Olli rings.

The Covered Loop is a textile loop in pre-stretched, overlapped Dyneema, built to take high loads with secure, reliable connections. Ideal for static rigging and as a textile hook for heavily loaded components, light and compact. Sizes S 14x10, M 20x14 and L 28x20, matched to Olli rings (LC-101 to LC-103).
Read more

Soft Shackle in Dyneema (SS-102 to 105)

Soft Shackle in Dyneema (SS-102 to 105)

100% Dyneema soft shackle: the light alternative to metal shackles, kind to decks and sails. S to XL.

The Soft Shackle is a light and very strong alternative to metal shackles, in 100% Dyneema with 12-strand (3 mm) or 16-strand (6 mm) construction for high working and breaking loads. Soft, it cannot damage decks, sails or rigging, and it opens and closes by hand. Four sizes S to XL, matched to Olli rings (SS-102 to SS-105).
Read more

Polyester sheet with eye splice + Olli M (PYP-101 to 104)

Polyester sheet with eye splice + Olli M (PYP-101 to 104)

Gottifredi Maffioli polyester sheet with a hand-finished eye splice and an Olli M ring. 10 or 25 m, 10 or 12 mm.

A ready-to-use polyester sheet by Gottifredi Maffioli with a hand-finished eye splice that already integrates an Olli M low-friction ring. Low stretch, excellent UV and abrasion resistance, easy to handle: for cruising and general sailing. Lengths 10 and 25 m, diameters 10 and 12 mm, red or grey (PYP-101 to PYP-104, -R1 red, -G1 grey).
Read more

easyBarber kit

easyBarber kit

Complete barber-hauler system: adjust the lead angle of headsail or gennaker sheet from the cockpit.

easyBarber is a complete, ready-to-use system to adjust the sheeting point of headsail or gennaker from the cockpit. In the box: an Olli M ring with its sheathed Dyneema loop for the deck, a polyester control line with a pre-spliced eye that integrates a second Olli M ring, and an Olli Block to re-lead the gennaker sheet at the stern. Bring the sheet down and inboard to trim the sail on every point of sail. Line 10 or 25 m, 10 or 12 mm.
Read more

easyFurling kit

easyFurling kit

Four Olli S rings with sheathed Dyneema loops: a clean, tangle-free furling line lead along the stanchions.

easyFurling keeps the furling line organised and tangle-free from the drum to the cockpit. The kit includes four Olli S low-friction rings, each with a sheathed Dyneema S loop to secure it to a stanchion: a clean, precise lead toward the bow and a clear deck, for smooth furling and unfurling in every condition. Light, durable and maintenance-free, ready to install.
Read more

easyPreventer kit

easyPreventer kit

Boom preventer led back to the cockpit through an Olli ring: safer downwind sailing, no accidental gybes.

easyPreventer makes downwind sailing safer by preventing accidental gybes. The polyester line runs from the boom end forward through an Olli low-friction ring fixed to a bow cleat with its sheathed Dyneema loop, and back to the cockpit: you set and release the preventer without leaving the helm. Rig one per side for gybing control on long runs. Line 10 or 25 m, 10 or 12 mm, red or grey.
Read more

Jake Full Kit (JAK-101)

Jake Full Kit (JAK-101)

The complete Jake modular boat hook system in one box: two poles, every head and the Fidlock storage mounts.

Jake Full Kit is the complete modular system: Telescopic pole (107-190 cm, floats), Short pole, Boat Hook head, Brush head, Line-passing head, QuickGrip Linemaster head and the Fidlock quick-release storage mounts. One pole carries two tools at once, one on each end, and heads swap in a second with one hand. Patent pending. DAME Design Award nominee 2025. Code JAK-101.
Read more

Jake Starter Kit (JAK-102)

Jake Starter Kit (JAK-102)

Telescopic pole plus boat hook head: the entry point of the Jake modular system, ready to expand.

Jake Starter Kit is a complete boat hook ready to work and ready to grow: Telescopic pole (aluminium 6082, 107-190 cm, floats, takes a head on both ends) and Boat Hook head with anti-shock rubber tip. Add wash, mooring or line-handling heads later, all on the same quick-release. Patent pending. DAME Design Award nominee 2025. Code JAK-102.
Read more

Jake Wash Kit (JAK-104)

Jake Wash Kit (JAK-104)

Telescopic pole, brush head and boat hook head: one pole for washing down and for docking.

Jake Wash Kit turns the modular system into a wash-down station: the Telescopic pole reaches hull, deck and superstructure, the Brush head cleans without scratching, and the Boat Hook head keeps the same pole ready for docking. Swap heads in a second, or mount one on each end. Patent pending. DAME Design Award nominee 2025. Code JAK-104.
Read more

Jake Mooring Kit (JAK-105)

Jake Mooring Kit (JAK-105)

Telescopic pole with boat hook, line-passing and QuickGrip Linemaster heads: the complete mooring set.

Jake Mooring Kit is the line-handling set-up: fend off and catch lines with the Boat Hook head, pass a line over a bollard from a distance with the Line-passing head, and pick up mooring lines hands-free with the QuickGrip Linemaster, all on one floating Telescopic pole. Patent pending. DAME Design Award nominee 2025. Code JAK-105.
Read more

Jake Telescopic pole (JTP-101)

Jake Telescopic pole (JTP-101)

Telescopic, floating pole 107-190 cm in aluminium 6082 with a Fidlock quick-release on both ends.

The Telescopic pole is the extendable shaft of the Jake system: light, rigid and floating, from 107 to 190 cm, Ø 5.1 cm, 845 g. Double non-slip grip and a Fidlock quick-release on both ends, so it carries two heads at once. Part of the Jake modular system: every head clicks onto either end of any Jake pole with the Fidlock magnetic quick-release. DAME Design Award nominee 2025. Code JTP-101.
Read more

Jake Short pole (JSP-101)

Jake Short pole (JSP-101)

Compact Jake pole for close-range work from cockpit or dock: any Jake head in one click.

The Short pole is the compact shaft of the Jake system, for close-range work from the cockpit or the dock and easy to stow in a locker. Aluminium 6082 with a non-slip grip, 211 g. Part of the Jake modular system: every head clicks onto either end of any Jake pole with the Fidlock magnetic quick-release. DAME Design Award nominee 2025. Code JSP-101.
Read more

Jake Boat Hook head (JBH-101)

Jake Boat Hook head (JBH-101)

Boat hook head with bumper and anti-shock rubber tip: fends off, catches lines, leaves no marks.

The Boat Hook head fends off, catches mooring lines and pulls in fenders or buoys. The bumper head and anti-shock rubber tip protect hulls and gelcoat, yours and your neighbours'. Delrin ST100, corrosion and UV resistant, 133 g. Part of the Jake modular system: every head clicks onto either end of any Jake pole with the Fidlock magnetic quick-release. DAME Design Award nominee 2025. Code JBH-101.
Read more

Jake Line-passing head (JLH-101)

Jake Line-passing head (JLH-101)

Passes a mooring line over a bollard or ring from a distance, without stepping off the boat.

The Line-passing head lets you pass a mooring line over a bollard or through a ring from a distance, safely, without leaving the deck. Delrin ST100, corrosion and UV resistant, 156 g. Part of the Jake modular system: every head clicks onto either end of any Jake pole with the Fidlock magnetic quick-release. DAME Design Award nominee 2025. Code JLH-101.
Read more

Jake QuickGrip Linemaster head (JQH-101)

Jake QuickGrip Linemaster head (JQH-101)

Picks up mooring lines at the first try, single-handed, and grips without damaging the rope.

The QuickGrip Linemaster head catches mooring lines fast and safely without using your hands: instant grip at the first try, ideal for solo mooring, firm hold without damaging the rope. Delrin ST100, 107 g. Part of the Jake modular system: every head clicks onto either end of any Jake pole with the Fidlock magnetic quick-release. DAME Design Award nominee 2025. Code JQH-101.
Read more

Jake Brush head (JBR-101)

Jake Brush head (JBR-101)

Dual-surface brush head: cleans deck, teak and hull without scratching, in the water and on land.

The Brush head turns any Jake pole into a cleaning tool for deck, teak and hull: it cleans on both faces, removes algae and fouling without scratching the gelcoat, and the bristles reach tight corners. UV and salt-resistant technopolymer. Part of the Jake modular system: every head clicks onto either end of any Jake pole with the Fidlock magnetic quick-release. DAME Design Award nominee 2025. Code JBR-101.
Read more

Jake Fidlock quick-release mounts (JQK-101)

Jake Fidlock quick-release mounts (JQK-101)

Fidlock magnetic mounts for lifeline, pulpit or cockpit: the Jake pole snaps into place and stays within reach.

The Fidlock quick-release mounts hold the Jake system together and keep the pole always within reach: bring it close and it snaps into place magnetically, vibration-free, then releases with one hand. Mounts on lifeline, pulpit or cockpit. Marine-grade, corrosion and UV resistant. Part of the Jake modular system: every head clicks onto either end of any Jake pole with the Fidlock magnetic quick-release. DAME Design Award nominee 2025. Code JQK-101.
Read more

Way2 inflatable gangway (W2G-101, W2G-102)

Way2 inflatable gangway (W2G-101, W2G-102)

Inflatable reversible gangway: it folds into a locker, inflated it is rigid and walkable. Now in 200 and 250 cm.

Way2 is the inflatable reversible gangway: folded it takes 0.03 m3, less than a cabin suitcase; inflated it becomes rigid and walkable, in port or at anchor. Drop-stitch core, heat-welded marine PVC, EasyGrip EVA anti-slip deck, stainless hooks and ergonomic handles. Way2 200 (200 x 50 x 15 cm) and the new Way2 250 (250 x 60 x 15 cm), both 150 kg max load. Codes W2G-101, W2G-102.
Read more

Dog Ramp

Dog Ramp

Inflatable dog boarding ramp: your dog climbs back on board on its own, from the water to the bathing platform.

Dog Ramp lets your dog climb back on board on its own: an anti-slip inflatable ramp from the water to the bathing platform. Drop-stitch construction like Way2; it floats and folds to 60 x 40 x 20 cm for stowage. Size 120 x 94 x 15 cm, max load 60 kg. Code DGR-101. New for 2027.
Read more

SUP 320 and SUP Holder

SUP 320 and SUP Holder

SUP 320 inflatable paddle board, wide and stable for a day out from the boat, and SUP Holder brackets to stow it on the stanchions.

SUP 320 is built like Way2: high-pressure drop-stitch, white EVA deck pad, three removable fins and a cargo net, 320 x 80 x 15 cm, wide and stable for a day out from the boat. SUP Holder stows the board or a Way2 along the side of the boat: two aluminium brackets with adjustable hooks for Ø 20-30 mm stanchions, a strap that keeps the board down under way and a rubber anti-scuff surface. Codes SUP-101, PS-101. New for 2027.
Read more

Stow Anchor

Stow Anchor

Disassemblable sheet anchor in hot-dip galvanised steel, 2.5 to 15 kg: it comes apart in three pieces and stows in its bag.

Stow Anchor is a disassemblable sheet anchor in hot-dip galvanised steel. It comes apart in three pieces and stows in its own bag in any locker; one AISI 316 bolt locks the flukes to the shank. Excellent holding on sandy bottoms: the perfect spare or kedge anchor. Four sizes: 2.5 kg for tenders and RIBs, 5 kg for day boats, 10 and 15 kg as spare for cruising and larger boats (AC-102 to AC-115). New for 2027.
Read more

Chain Stopper

Chain Stopper

AISI 316 mirror-polished chain stopper for 8-10 mm chain: the anchor load goes to the deck, not to the windlass.

The anchor holds the boat, not your windlass. With the chain locked in the Chain Stopper, the snatching at anchor goes to the deck and not to the windlass motor and gears; underway, the anchor stays firm in its roller. AISI 316 stainless steel, mirror polished, for 8-10 mm chain, 110 x 66 x 80 mm, installed with four M8 screws. Code CB-110. New for 2027.
Read more

Flex Pole 18 and carbon poles

Flex Pole 18 and carbon poles

Removable awning poles: Flex Pole 18 keeps the canvas taut by flexing; rigid carbon poles Ø 40-80 mm with flush deck sockets.

Flex Pole 18 hooks the canvas and, by flexing, keeps it taut with no extra lines: fibreglass with carbon finish, AISI 316 fittings, 140 to 200 cm. It slides into a flush deck socket or a stanchion mount for Ø 20-30 mm tubes and comes out in seconds. Rigid carbon poles Ø 40, 60 and 80 mm, 180 and 220 cm, carry the tensioning line and clamcleat in the head and slide into flush stainless sockets with lid. New for 2027.
Read more

Rope Deflector (ROD-101)

Rope Deflector (ROD-101)

Self-adhesive silicone profile that keeps sheets and mooring lines off portholes, fairleads and topsides.

Rope Deflector protects hulls, topsides and trims from line chafe around portholes, fairleads and windows. Its UV-stable silicone profile deflects sheets and mooring lines away from the surface, preventing scratches and gelcoat wear. Tool-free: peel and stick with pre-applied 3M VHB tape. Low profile, works with polyester and Dyneema lines of any diameter. Code ROD-101.
Read more

Spira guardrail cover (SP-101)

Spira guardrail cover (SP-101)

Spiral-cut foam cover that twists onto the lifeline in seconds, no tools: protects, cushions, stays put.

Spira is a guardrail cover that installs in seconds without tools: its spiral-cut foam core twists around the lifeline and keeps the stainless cable from slipping out, while cushioning knocks and abrasion for crew, sails and fenders. Clean look, easy to remove and refit. Code SP-101.
Read more

3D printed parts and custom projects

3D printed parts and custom projects

Parts printed to order in Pozzuoli, Italy, and deck hardware designed around your boat, from one-off to series supply.

Small fittings and replacement parts printed to order in Pozzuoli, Italy, in technical polymers for outdoor use and five colours. More than twenty parts online, new ones every month; send us a photo or drawing of a part that no longer exists and we model and print it. For shipyards and OEM: deck hardware, shade and inflatables designed around your boat, in AISI 316, anodised aluminium or carbon, one-off or series supply, NDA on request.
Read more

Allock

Allock

EASY ALLOCK is a universal winch connector with expanded-fit tech, allowing stable, tool-free attachment of multiple accessories and profiles.

EASY ALLOCK is an innovative universal connection system for winches. Using expander technology, it ensures a stable, tool-free fit for accessories like handles, cleats, and fairleads. Designed for safety and ease of use, it adapts to various winch profiles, offering a quick, reliable connection without rotation or play. A smart solution to improve efficiency and versatility on board for both sailing and docking operations.
Read more