NAUTIX METAPOX
Adhesion promoter for epoxy coatings over metal
Nautix METAPOX is a new-generation adhesion promoter for epoxy coatings over metal surfaces. This colourless non-film-forming product offers a simple, fast and reliable solution to epoxy-to-metal adhesion issues, and prepares chemically the metal surfaces to epoxy bonding.
After sanding or sandblasting, oxidation of metal substrate will arrive shortly, and that’s why it’s recommended to respect strictly overcoating periods.
Read more
A9 T.Speed
Fluorescent, hard matrix antifouling with ultra-smooth finish.
A9 T.SPEED is a hard matrix antifouling specially recommended for keels and appendages on racing sailing boats.
This fluorescent antifouling is used to paint surfaces that can be seen if the boat capsizes. It can also be used to see if objects (plastic bags, ropes, etc.) are caught on the appendages.
For professional use only.
Read more
A3 Yachting
Best-seller in the Nautix range of antifoulings, A3 Yachting is recommended for sailboats and motorboats cruising at speeds of less than 30 knots
A3 Yachting is an ablative antifouling recommended for both sailboats and motorboats up to 30 knots. Its optimised formula gives it a high level of effectiveness against fouling.
Product authorised for professional and DIY use.
An ablative matrix will always be more versatile than a hard matrix, especially if the boat sails irregularly. It is also more effective during periods of heavy fouling or in difficult harbour conditions.
Read more
A4 Yachting
The best-seller in the Nautix range of antifoulings, A4 Yachting is recommended for sailboats and powerboats
A4 Yachting is a high-performance hard matrix antifouling recommended for sailboats, fishing boats, speedboats and boats that are beached or on trailers. Its optimised formula gives it a high level of effectiveness against fouling.
Nautix always recommends applying 2 coats of antifouling. Never apply a hard matrix antifouling over an ablative.
Product authorised for professional and DIY use
Read more
A7 T.Speed
Available as a spray or pot, A7 T.SPEED is a hard matrix antifouling specially designed for Z-Drive propellers and bases.
A7 T.SPEED is a hard matrix antifouling designed specifically for Z-Drive propellers and bases. It keeps propellers and bases clean for optimum propulsion. Nautix always recommends applying 4 coats of antifouling.
Available in a range of pack sizes, the aerosol can makes it easy to apply to hard-to-reach surfaces and gives a perfect finish. For optimum protection, combine the action of A7 T.SPEED antifouling with its P7 primer.
For profesionnal use only.
Read more
A9000 SPC
Long-lasting antifouling for professionals
A9000 SPC is a long-lasting antifouling recommended for sailboats, powerboats and superyachts frequently sailing in heavily fouled areas. This antifouling uses “SPC: Self-Polishing Copolymer” technology: the resin hydrolyses uniformly with the flow of water, allowing continuous leaching of biocides over long periods.
The effectiveness of A9000 SPC is proportional to the thickness of paint applied to the hull, which means that its biocidal activity is longer than that of traditional antifoulings
Read more
