Products
M58 - Steering Cable
M58 - Steering Cable for universal marine
(1) Push pull cable, heavy duty cable.
(2) The outer is long lay conduit, OD is 13 mm, 24 wires, and coating material is HDPE.
(3) Core is helical cable; OD is 6 mm, using PVC protector for protection.
(4) Cable end fitting material is stainless for anti-corrosion.
(5) Connect with steering system T67.
(6) The helical cable applied with sufficient lubricant for good efficiency.
7.Various lengths are available.
M47 - Steering Cable
M47 - Steering Cable for universal marine
(1) Push pull cable, heavy duty cable
(2) The outer is long lay conduit, OD is 16 mm, 24 wires, and coating material is HDPE.
(3) Core is helical cable; OD is 7.9 mm, using PVC protector for protection.
(4) Cable end fitting material is stainless steel for anti-corrosion.
(5) Connect with steering system SH5023.
(6) The helical cable applied with sufficient lubricant for good efficiency.
(7) Various lengths are available.
M66 - Steering Cable
M66 - Steering Cable for universal marine
(1) Push pull cable, heavy duty cable
(2) The outer is long lay conduit, OD is 16 mm, 24 wires, and coating material is HDPE.
(3) Core is helical cable; OD is 7.9 mm, using PVC protector for protection.
(4) Cable end fitting material is stainless for anti-corrosion.
(5) Connect with steering system T71.
(6) The helical cable applied with sufficient lubricant for good efficiency.
(7) Various lengths are available.
C8 - 3300S Engine(Throttle) control cable
C8 - 3300S Engine(Throttle) control cable , Use for inboard, sterndrive and outboard engines cable
1. Push pull cable
2. The outer is long lay conduit, OD is 8.7 mm, 18 wires, and coating material is HDPE in red.
3. Core wire OD is 3 mm, material is galvanize steel with PA6 coating.
4. Cable end fitting material is stainless steel for anti-corrosion.
5. End thread SPEC is 3/16-32 UNF and protected by PVC protector.
6. The core cable applied with sufficient lubricant for good efficiency.
7. Various lengths are available.
C48 - 4300BC Engine(Throttle) control cable
C48 - 4300BC Engine(Throttle) control cable , Use for inboard, sterndrive and outboard engines cable
(1) Push pull cable.
(2) The outer is long lay conduit, OD is 11 mm, 19 wires, and coating material is HDPE in red.
(3) Core wire OD is 4.3 mm, material is galvanize steel with PA6 coating.
(4) Cable end fitting material is stainless steel and brass plating with Ni for anti-corrosion.
(5) End thread SPEC is 1/4-28UNF and protected by PVC protector.
(6) The core cable applied with sufficient lubricant for good efficiency.
(7) Various lengths are available.
C22 - 4300C Engine(Throttle) control cable
C22 - 4300C Engine(Throttle) control cable , Use for inboard, sterndrive and outboard engines cable
(1) Push pull cable.
(2) The outer is long lay conduit, OD is 11 mm, 19 wires, and coating material is HDPE in red.
(3) Core wire OD is 4.3 mm, material is galvanize steel with PA6 coating.
(4)Cable end fitting material is stainless steel and brass plating with Ni for anti-corrosion.
(5) End thread SPEC is 1/4-28UNF and protected by PVC protector.
(6) The core cable applied with sufficient lubricant for good efficiency.
(7) Various lengths are available.
C5 - Engine(Throttle) control cable
C5 - Engine(Throttle) control cable , Use for inboard, sterndrive and outboard engines cable
(1) Push pull cable.
(2) The outer is long lay conduit, OD is 8.3 mm, 23 wires, and coating material is PP in blue.
(3) Core wire OD is 3.2 mm, material is SUS304 steel with PBT coating.
(4) Cable end fitting material is stainless steel and brass plating with Ni for anti-corrosion.
(5) The material of plastic component is PA66.
(6) The core cable applied with sufficient lubricant for good efficiency.
(7) Various lengths are available.
C14 - Engine(Throttle) control cable
C14 - Engine(Throttle) control cable , Use for inboard, sterndrive and outboard engines cable.
(1) Push pull cable.
(2) The outer is long lay conduit, OD is 8.3 mm, 23 wires, and coating material is PP in blue.
(3) Core wire OD is 3.2 mm, material is SUS304 steel with PBT coating.
(4) Cable end fitting material is stainless steel and brass plating with Ni for anti-corrosion.
(5) The material of plastic component is PA66.
(6) The core cable applied with sufficient lubricant for good efficiency.
(7) Various lengths are available.
C36 - Engine(Throttle) control cable
C36 - Engine(Throttle) control cable , Use for inboard, sterndrive and outboard engines cable.
(1) Push pull cable.
(2) The outer is long lay conduit, OD is 8.3 mm, 23 wires, and coating material is PP in blue.
(3) Core wire OD is 3.2 mm, material is SUS304 steel with PBT coating.
(4) Cable end fitting material is stainless steel and brass plating with Ni for anti-corrosion.
(5) The material of plastic component is PA66.
(6) The core cable applied with sufficient lubricant for good efficiency.
(7) Various lengths are available.