Products

hamma® Pro

hamma® Pro Strand is a market leading compacted strand wire rope.

hamma® Pro strand has been developed to provide the marine industry with a quality compacted strand that has a smooth clean finish, aesthetically superior to any product currently on the market, while maintaining the strength and corrosion resistance of traditional stainless steel wire rope. As hamma® is a ‘compacted’ strand there is no need to pre-stress the wire. This process of strand compaction decreases the constructional stretch of the wire which also results higher break loads.

hamma®

Stainless steel fittings for multiple applications

hamma® now has the largest range of stainless steel deck gear which includes clips, snaps and deck hardware, along with guardwire fittings for marine, industrial and architectural applications.

hamma® X-Strand

Global leader in 1x19 wire rope

hamma® X 1x19 is a (12/6/1) construction and is used for mast stays, balustrading, guy ropes and structural applications. Manufactured by world-leaders KOS, to hamma® specification, ensures consistent quality, outstanding performance, and a product you can rely on. All hamma® wire is fully traceable, with milling certificates available on request.

Sertec CMCE Marine

Lloyds & RINA certified Lightning Protection Device for Marine Applications

The CMCE Marine device protects your vessel by absorbing and compensating the charges of the electric field around your asset. These charges are distributed to the ground system, which in turn diverts them to the water, generating a protection shield around the vessel or asset. Solutions are available for everything from small leisure craft up to commercial ships, cranes, oil rigs, wind wings and wind turbines amongst others.

Sertec Storm 7 Condition Monitor

Easily monitor your lightning protection system.

The Storm 7 condition monitor from Sertec continually monitors key atmospheric conditions and the ionic drain of your installed Sertec CMCE device. Storm 7 can trigger alarms if the ground connection were to be disturbed and produce an annual report which may be looked favourably upon by insurance companies. This makes the Sertec system a truly intelligent lightning protection system.

Sailtec Hydraulic Integral Adjuster

SAILTEC was one of the first companies to combine a hydraulic cylinder with a small hydraulic pump commonly known as an Integral.

Larger diameter piston rod Resists side load deflection Distributes seal contact for longer life Double Rod Seals Guides Clean, scrape and seal piston rod for longer, leak free service life Sizes from -08 to -30 are produced and stocked in various stroke lengths: 226mm/8.9” to 421mm/16.5” 250 MM (9.8” – 10.5”) are specifically made to replace older Navtec integrals without modifying the backstay length) Custom lengths and strokes are common

Sailtec Hydraulic Panel Pumps

SAILTEC produces a range of proven, durable and reliable panel-mounted pumps that allow you to select a panel suitable for your exact needs

Pumps mounted on a panel and located in the cockpit, on a pedestal, near the rail, or on any bulkhead, can drive one or more cylinders located anywhere in the boat. Generally, remote panel pumps result in less crew, more control, and faster cylinder action than integral pumps. They can be configured to push or pull cylinders for common applications such as backstays, vangs, forestays, outhauls, and many “uncommon” custom applications, such as manual swim platform cylinders, canting keels etc

Sailtec Hydraulic Power Pack

Designed and Built for Marine Applications on Sailboats and Powerboats 12 Volt DC or 24 Volt DC

SAILTEC’s compact and lightweight Hydraulic Power-Pack is engineered to deliver fast, push-button control for a wide range of onboard hydraulic systems. Built for performance and reliability, this unit is ideal for both new builds and retrofit applications. Typical Applications Include: Backstay & Forestay Boom Vang & Outhaul Cunningham & Flattening Reef Retracting Keels & Pivoting Centreboards Transom Gates, Hatch Doors & Swim Platforms

Sailtec Hydraulic Cylinders

SAILTEC has designed its cylinders to be reliable, long-lasting, and efficient. SAILTEC has done this by using high-strength aluminium alloys

SAILTEC cylinders are available in three standard stroke lengths with pneumatic return or double-acting feature. Aluminium upper jaws are standard on all cylinders. All exterior surfaces are hard anodized for greater corrosion resistance, and to retain their attractive appearance for many years of service. The SAILTEC Locking Option is available on both standard and long-stroke cylinders. This mechanical device locks the cylinder in position, thus allowing the release of hydraulic pressure.

Sailtec Hydraulic Boom Vangs

SAILTEC manufactures boom vangs in the same manner as hydraulic cylinders.

The boom vang has a nitrogen return system and if sized properly will support the weight of the boom, eliminating the need for a topping lift. • Tension is 5000 psi or 350 bar • Return force is at 500 psi or 35 bar • Length is pin-to-pin closed and will be adjusted to meet your EXACT REQUIREMENTS • Stainless cylinders available • Standard finish is hard coat black anodized Made of the SAME HIGH-QUALITY materials used for SAILTEC cylinders, boom vangs have heavier piston rods than cylinders.