Vanclaes brings slipway launch capability to O3 and O4 boat trailers

Vanclaes brings slipway launch capability to O3 and O4 boat trailers

by Stian Duijvelaar20 October 20263 min read

Vanclaes O3 and O4 systems cover the European heavy-trailer categories: O3 applies from 3.5 to 10 tonnes maximum permissible mass, while O4 applies above 10 tonnes. For many operators, transporting a heavy vessel is only part of the challenge. Once it reaches the water, launching requires a crane, travel lift or separate handling system. This increases cost, complicates logistics and restricts where and when the craft can be deployed.

Vanclaes O3 and O4 systems cover the European heavy-trailer categories: O3 applies from 3.5 to 10 tonnes maximum permissible mass, while O4 applies above 10 tonnes. For many operators, transporting a heavy vessel is only part of the challenge. Once it reaches the water, launching requires a crane, travel lift or separate handling system. This increases cost, complicates logistics and restricts where and when the craft can be deployed.

Vanclaes approaches the problem differently. Each O3 or O4 system is engineered around the vessel, towing vehicle, journey and launch environment. The result is one purpose-built trailer that can transport the craft and launch or recover it directly from a slipway.

“Customers usually come to us with a vessel and an operational requirement, not a finished trailer specification,” said Stian Duijvelaar, CEO at Vanclaes. “Our job is to do the difficult work. We translate the boat data, transport requirements and launch conditions into a complete engineered solution that carries the craft safely and gets it into the water.”

From vessel specification to operational solution

Vanclaes can support customers throughout the complete project, including:
• Defining the technical trailer requirements
• Tender support including preparing technical specifications and documentation
• Addressing relevant road, registration and regulatory requirements
• Manufacturing, configuring, testing & delivering the completed trailer

This support is particularly valuable for boatbuilders, government organisations and commercial operators that know what their vessel must do but may not have the specialist knowledge needed to specify an O3 or O4 launch trailer.

Launch capability at scale
Vanclaes systems can be supplied as centre-axle trailers or semi-trailers, using new-build chassis or the conversion of a suitable existing trailer. Depending on the project, construction can include stainless steel or coated structural steel, air brakes with ABS, adjustable axles, hydraulic systems, electric winches and vessel-specific supports.

The distinguishing capability is not simply the weight the trailer can carry. It is the ability to preserve practical non-assisted launch and recovery as the craft becomes larger and heavier. Vanclaes has already provided such solutions for crafts exceeding 20 tonnes.

Applications include workboats, rescue craft, police and coastguard vessels, defence craft, large RIBs, autonomous vessels and specialist leisure boats.

“Transporting a large boat should not mean losing the freedom to use a slipway,” added Duijvelaar. “We want customers to be able to arrive with their craft, launch it and recover it using a system engineered specifically for that operation.”

Visitors can discuss O3 and O4 transport and launch projects with Vanclaes at Metstrade 2026, taking place from 17–19 November at RAI Amsterdam.

Vanclaes Boat Trailers
Stand 02.126