Products

Seajet 027 Saikō

Copper-free antifouling

SEAJET 027 Saikō is a copper free, self polishing antifouling paint based on an unique resin. The excellent antifouling effect is derived from the highly active hydrolysis polymer which ensures maximum effectiveness and leaching of active ingredients. Available in bright colours including white. Can be used on all substrates including aluminium.

Seajet 031 Samurai

Economical antifouling for one season

Seajet 031 Samurai is a slow polishing antifouling with a great value for money. Season long performance. - Slow polishing - Effective low-cost antifouling - Moderate fouling areas - High coverage rate - Test winning heritage

Seajet 032 Professional

Economical antifouling

Seajet 032 Professional is a copper based antifouling for moderate fouling areas. For professional applicators. This economical antifouling is compatible with almost all antifouling and gives a season long protection. Can be used on all substrates except aluminium.

Seajet 033 Shogun

Premium self polishing antifouling

Seajet 033 Shogun is premium self polishing antifouling which is highly effective against slime and weed. Suitable for high fouling areas. Suitable for all types of pleasure craft with a maximum speed up to 40 knots.

Seajet 034 Emperor

High performance self polishing antifouling

Seajet 034 Emperor is a high performance self polishing antifouling, suitable for aluminium. Ideal for club racers as it can be burnished during the season. Available in bright colours. No risk of galvanic corrosion on aluminium surfaces.

Seajet 036 Endurance

Hard matrix antifouling

Seajet 036 Endurance is a hard matrix antifouling with high copper content and correspondingly high coverage rate. Suitable for high fouling areas and speeds up to 70 knots. Can be used on all substrates except aluminium.

Seajet 037 Coastal

Hard antifouling

Seajet 037 Coastal is a hard antifouling for boats with speed up to 70 knots. Suitable for fresh water. - Hard matrix antifouling - Performs in inland waterways - Suitable for drying mud berths - For high speed craft

Seajet 038 Taisho

Copper-free antifouling

Seajet 038 Taisho is a copper-free, super self polishing antifouling based on an unique resin that gives outstanding antifouling protection in the highest fouling areas. The excellent antifouling effect is derived from the highly active hydrolysis polymer which ensures maximum effectiveness and leaching of active ingredients. Can be used on all substrates including aluminium.

Seajet 039 Platinum Mono-Component

Ultimate performing SPC antifouling

Seajet 039 Mono-component is an ultimate performing SPC antifouling. Based on the latest resin technology from Japan it is suited to all fouling environments and ideal for application to boats in the highest fouling areas. Can be used on all substrates except aluminium.

Seajet 039 Platinum 2-Components

Advanced self polishing SPC antifouling

Seajet 039 Platinum 2-Components is an advanced Self Polishing Copolymer (SPC) antifouling. An ultimate performance antifouling suitable for the highest fouling areas. Ideal for blue water cruisers. Can be used on all substrates except aluminium.

Seajet RibCoat

SEAJET RIBCOAT SET is a transparent biocide-free, silicone foul-release coating system for use on underwater hulls and tubes of rib's.

Seajet RIBCOAT is a two-step foul-release kit engineered specifically for Rigid Inflatable Boats that live afloat for extended periods. Keep your RIB light, fast and fouling-free all season. Seajet RIBCOAT couples an ultra-clear epoxy primer with our more eco-friendly RIBCOAT silicone finish, forming a sleek, low-drag skin on both hull and tubes that shrugs off growth. Perfect protection, zero biocides. Provides long term protection against fouling in both fresh and salt water environments.

Seajet Pellerclean

SEAJET PELLERCLEAN CLEAR COAT is a foul-release coating for use on propellers, stern gear, trimtabs, light bulbs, etc.

Pellerclean is a biocide free, foul-release coating for propeller and stern gear. Pellerclean consists of two-component epoxy primer and one-component silicone coating providing foul-release properties against marine growth in both fresh and salt water. Fouling may adhere; however, this will be removed by water friction or gentle washing with a sponge.

Seajet Triple Pack

Self-polishing coating suitable for propellers, stern gear and trim tabs

Seajet Triple Pack is a self-polishing coating suitable for propellers, stern gear and trim tabs. The Triple Pack is an all-in-one product. This coating lasts for one season. Seajet Triple Pack is suitable for motorboats and sailing yachts up to 40 knots. Suitable for aluminium, stainless steel and alloy.

Seajet Bilge Paint

One component alkyd finish for bilges

SEAJET BILGE PAINT is a one component alkyd finish, dedicated to protect boat bilges, lockers and bulkheads. This product is resistant against antifreeze, grease, diesel fuel, and engine oil. * High gloss * Durable * Easy to clean

Seajet Clear Coat

Foul-release coating for underwater lights

SEAJET PELLERCLEAN CLEAR COAT is a foul-release coating for use on propellers, stern gear, trimtabs, etc. Provides long term protection against fouling in both fresh and salt water environments. Fouling may loosely attach but is easily removed by water movement or washing (sponge).

Seajet 015 Underwater Primer

Underwater primer and barrier coat

Seajet 015 Underwater Primer is based on a special acrylic resin and works as an excellent sealer/barrier coat over unknown, incompatible and Teflon based antifouling. It is quick drying and adheres excellent to subsequent coats.

Seajet 117 Epoxy Primer

Multi-purpose epoxy primer

Seajet 117 Multipurpose Epoxy Primer is a two component primer, durable and protects your boat against osmosis with 4-5 roller coats. Primer for combination with antifouling and two component topcoats. An ideal first coat for GRP and suitable as a first coat for aluminium substrates.

Seajet 114 Propeller Primer

Epoxy primer for aluminium and alloys

SEAJET 114 PROPELLER PRIMER is an epoxy primer that maximises adhesion to aluminium and alloys. It offers superior performance to etching primers and can be used above and below water, on stern gear, outboard legs, propellers, trim tabs etc.

Seajet Thinner A

Antifouling thinner

Xylene based thinner for Seajet antifouling, Seosil, Pellerclean and Seajet 015 Primer.

Seajet Thinner E

Thinner for epoxy paint

Xylene based thinner and cleaner for epoxy based paints.

Seajet Thinner U

Alkyd thinner

Alkyd thinner for Seajet 120 UV Varnish.

Seajet 120 UV Varnish

Traditional tung oil varnish

SEAJET 120 UV VARNISH is a beautiful, high gloss traditional tung oil varnish. This one component varnish contains UV absorbers to provide longer life and is easy to apply.

Seajet 021

Biocide-free underwater coating

Seajet 021 is a biocide-free, erodible underwater coating. The unique resin makes the coating refresh layer after layer. This ‘soap’ mechanism makes it difficult for fouling to stick. It can be used on all substrates including aluminium. A maximum speed of 40 knots. 2 coats will last up to one season.

Seajet Seosil RX

Silicone foul-release coating for underwater hulls

SEAJET SEOSIL RX is a biocide-free, silicone foul-release coating for use on underwater hulls. Provides long term protection against fouling in both fresh and salt water environments. Fouling may loosely attach but is easily removed by water movement or washing (sponge). To be used on fast and active boats.

Seajet Seosil RX Pro

Foul-release coating for underwater hull

SEAJET SEOSIL RX PRO is a biocide-free, silicone foul-release coating for use on underwater hulls. Provides long term protection against fouling in both fresh and salt water environments. Fouling may loosely attach but is easily removed by water movement or washing (sponge). To be used on any kind of boat.

Seajet Seosil Clear Coat

Foul-release coating for underwater hulls

SEAJET SEOSIL CLEAR COAT is a biocide-free, silicone foul-release coating for use on underwater hulls. Provides long term protection against fouling in both fresh and salt water environments. Fouling may loosely attach but is easily removed by water movement or washing (sponge).