Vanclaes brings complete boat transport and launching solutions to METSTRADE 2026
by Stian Duijvelaar20 October 20264 min read
From standard stainless-steel trailers and purpose-built O3/O4 solutions to electric launching without a tow vehicle, Vanclaes will demonstrate how it engineers around the vessel and the job it needs to perform.
From standard stainless-steel trailers and purpose-built O3/O4 solutions to electric launching without a tow vehicle, Vanclaes will demonstrate how it engineers around the vessel and the job it needs to perform.
Vanclaes will present its complete approach to boat transport, launching and recovery at METSTRADE 2026, taking place at RAI Amsterdam from 17–19 November.
Visitors can meet the Vanclaes team on stand 02.126 to discuss solutions ranging from standard road trailers to bespoke systems for non-assisted launching of large commercial craft and electrically powered launchers that operate without a tow vehicle.
“Customers do not always know which trailer specification they need—and they should not have to,” said Stian Duijvelaar, CEO of Vanclaes. “They know the vessel, where it needs to go and how they want to launch it. Our job is to turn that information into a complete, workable solution.”
Stainless-steel boat trailers
From leisure boats, RIBs and jetski’s to sports boats and fishing boats, Vanclaes offers stainless steel trailer solutions for every configuration that ensures a smooth journey, a protected vessel and the easiest of launch and recover systems.
Vanclaes helps customers identify the appropriate trailer and loading system based on the boat’s dimensions, weight, hull design and intended use.
The trailers combine stainless-steel construction with waterproof LED lighting, waterproof wheel bearings, coil spring suspension and boat-specific rollers or supports. With no conventional lighting board to remove before entering the water, owners can launch and recover their boats with less preparation at the slipway.
The result is a complete trailer solution designed to make road transport, launching and recovery easier and more reliable.
O3 and O4 solutions for larger craft
Vanclaes also engineers purpose-built O3 and O4 trailer solutions for vessels beyond conventional road-trailer capacities.
The key difference is launch capability. These systems are designed not only to transport a larger or heavier vessel, but also to launch and recover it directly from the trailer. This removes the need to arrange a crane every time the craft enters or leaves the water.
Potential applications include workboats, rescue and emergency craft, police and coastguard vessels, defence craft, large RIBs and autonomous vessels.
Each project begins with the craft and its operating requirements. Vanclaes undertakes the engineering work and supports customers with the technical, regulatory and specification information required for commercial tenders.
Launch and recover without a tow vehicle
The third product story is the electrically powered Boat-Launcher, which combines a purpose-built Vanclaes stainless-steel chassis with Tectrax electric amphibious wheel technology.
The self-propelled system can be operated remotely, allowing a boat to be moved, launched and recovered without a car, tractor or other tow vehicle.
Potential users include marinas, boatyards, rescue stations, and commercial operators that need to move or launch boats where vehicle access is difficult, inefficient or unavailable.
The system can support one-person operation, reduce the manpower needed for launch and recovery and potentially replace vehicles used for repeated boat movements.
A remote-controlled working model on the METSTRADE stand will demonstrate the operating principle of the Boat-Launcher.
The full-size system is currently progressing through the European CE approval process. Final saleable specifications, pricing and availability will be confirmed following approval.
Continue the conversation at the Vanclaes factory
METSTRADE visitors can also reserve a place on a hosted visit to the Vanclaes factory in Alphen aan den Rijn, approximately 25 minutes from the exhibition centre.
Vanclaes will collect registered guests from the RAI, transport them to the factory and return them afterwards. Food and refreshments will be provided during the visit.
The Factory Experience will include:
• A guided tour of the Vanclaes production facility
• An introduction to its design and manufacturing capabilities
• A closer look at stainless-steel trailer construction
• Standard and purpose-built trailer solutions
• A full-size Boat-Launcher demonstration
• Time with the Vanclaes team to discuss individual vessels and projects
“The stand is where we can understand what a customer wants to achieve,” added Duijvelaar. “The factory is where we can show them how we turn that requirement into a real, engineered solution.”
Meet Vanclaes at METSTRADE
17–19 November 2026
RAI Amsterdam
Stand 02.126
To arrange a meeting or request a hosted factory visit, visit vanclaes.com/metstrade or contact info@vanclaes.com.
Vanclaes will present its complete approach to boat transport, launching and recovery at METSTRADE 2026, taking place at RAI Amsterdam from 17–19 November.
Visitors can meet the Vanclaes team on stand 02.126 to discuss solutions ranging from standard road trailers to bespoke systems for non-assisted launching of large commercial craft and electrically powered launchers that operate without a tow vehicle.
“Customers do not always know which trailer specification they need—and they should not have to,” said Stian Duijvelaar, CEO of Vanclaes. “They know the vessel, where it needs to go and how they want to launch it. Our job is to turn that information into a complete, workable solution.”
Stainless-steel boat trailers
From leisure boats, RIBs and jetski’s to sports boats and fishing boats, Vanclaes offers stainless steel trailer solutions for every configuration that ensures a smooth journey, a protected vessel and the easiest of launch and recover systems.
Vanclaes helps customers identify the appropriate trailer and loading system based on the boat’s dimensions, weight, hull design and intended use.
The trailers combine stainless-steel construction with waterproof LED lighting, waterproof wheel bearings, coil spring suspension and boat-specific rollers or supports. With no conventional lighting board to remove before entering the water, owners can launch and recover their boats with less preparation at the slipway.
The result is a complete trailer solution designed to make road transport, launching and recovery easier and more reliable.
O3 and O4 solutions for larger craft
Vanclaes also engineers purpose-built O3 and O4 trailer solutions for vessels beyond conventional road-trailer capacities.
The key difference is launch capability. These systems are designed not only to transport a larger or heavier vessel, but also to launch and recover it directly from the trailer. This removes the need to arrange a crane every time the craft enters or leaves the water.
Potential applications include workboats, rescue and emergency craft, police and coastguard vessels, defence craft, large RIBs and autonomous vessels.
Each project begins with the craft and its operating requirements. Vanclaes undertakes the engineering work and supports customers with the technical, regulatory and specification information required for commercial tenders.
Launch and recover without a tow vehicle
The third product story is the electrically powered Boat-Launcher, which combines a purpose-built Vanclaes stainless-steel chassis with Tectrax electric amphibious wheel technology.
The self-propelled system can be operated remotely, allowing a boat to be moved, launched and recovered without a car, tractor or other tow vehicle.
Potential users include marinas, boatyards, rescue stations, and commercial operators that need to move or launch boats where vehicle access is difficult, inefficient or unavailable.
The system can support one-person operation, reduce the manpower needed for launch and recovery and potentially replace vehicles used for repeated boat movements.
A remote-controlled working model on the METSTRADE stand will demonstrate the operating principle of the Boat-Launcher.
The full-size system is currently progressing through the European CE approval process. Final saleable specifications, pricing and availability will be confirmed following approval.
Continue the conversation at the Vanclaes factory
METSTRADE visitors can also reserve a place on a hosted visit to the Vanclaes factory in Alphen aan den Rijn, approximately 25 minutes from the exhibition centre.
Vanclaes will collect registered guests from the RAI, transport them to the factory and return them afterwards. Food and refreshments will be provided during the visit.
The Factory Experience will include:
• A guided tour of the Vanclaes production facility
• An introduction to its design and manufacturing capabilities
• A closer look at stainless-steel trailer construction
• Standard and purpose-built trailer solutions
• A full-size Boat-Launcher demonstration
• Time with the Vanclaes team to discuss individual vessels and projects
“The stand is where we can understand what a customer wants to achieve,” added Duijvelaar. “The factory is where we can show them how we turn that requirement into a real, engineered solution.”
Meet Vanclaes at METSTRADE
17–19 November 2026
RAI Amsterdam
Stand 02.126
To arrange a meeting or request a hosted factory visit, visit vanclaes.com/metstrade or contact info@vanclaes.com.