Barton Marine Equipment Ltd
2000+ deck hardware products for boats up to 50ft
For more than 75 years Barton Marine has set the benchmark for high quality marine deck hardware. Our products are made in the UK at our purpose-built factory in Whitstable on the North Kent Coast, with a range running to more than 2,000 specialist products. Through our trusted distribution partners, our products can be found in leading chandleries in more than 40 countries around the world. Visit our expert team to find out about our new innovations for 2025.
STAND NUMBER:
01.474
CATEGORIES:
Trading regions
Africa:
Algeria, Angola, Benin, Botswana, Bouvet Island, Burkina Faso, Burundi, Cameroon, Cape Verde, Central African Rep, Chad, Comoros
Americas:
American Samoa, Anguilla, Antigua & Barbuda, Argentina, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Brazil, Canada
EVENT:
METSTRADE 2025
ADDRESS:
Marine House, Tyler Way CT5 2RS WHITSTABLE KENT United Kingdom
WEBSITE:
Products
View all products
Barton Bulkhead Pipe Glands
A water and vapor proof solution for pipe integrity running through bulkheads.
Bulkhead watertight integrity is essential in modern boat building and a requirement of maritime regulations. Pipes moving through the vessel and bulkheads always present a challenge. These Bulkhead Pipe Glands allow pipes to be sealed to the bulkhead but are fully serviceable and adjustable. The bolted and clamp fittings can be removed quickly and easily with basic tools. Made from 316 Stainless Steel and Nitrile Rubber (BS2751), means they are durable in the harshest environments.Read more56th Edition Catalogue
Our new catalogue, completely updated and full of technical information in both metric and imperial.
It's been a labour of love but it's finally in print and ready for collection from our stand - 1.474. It has our entire updated product range including the exciting new Bulkhead Seal System range. All weights and dimensions are in both metric and imperial, so wherever you are in the world it will make sense.Read moreGenoa Cars
Stylish yet durable Genoa cars that perform flawlessly and look great too.
Plain bearing Genoa cars, sliders and spinnaker pole slides Our newly redesigned range of Genoa cars and sliders designed to run on 25mm and 32mm T track. All are manufactured from high quality marine grade aluminium with our hardwearing black anodised finish for added protection. All cars and sliders featured on these pages have moulded nylon inserts to ensure free, smooth running under load and prevent damage to finish or potential corrosion. Smooth running under load.Read moreBarton Stanchion Range
We have a range of stanchion mounted blocks and high load eyes for use with furling systems or whenever you need to control a line running aft or fwd.
Our Stanchion Lead Blocks have always been part of our product portfolio, but as needs of sailors change, we need to adapt and provide options required by modern sailors. Therefore we have improved the range of all stanchion selections to include cam blocks, removable sheaves and a ratchet version.Read moreHBT1 Continuous Line Furler
A high tech, innovative continuous line furler for dinghys and dayboats.
Barton has incorporated the latest technology to create a hybrid bearing furler that features both solid state and Torlon ball bearings to ensure that the line runs smoothly and effortlessly even under great load.Read moreOutboard Motor Lifting Sling
A secure, manoeuvrable way to handle your motor.
New Barton Outboard Motor Sling was designed for customers worldwide who told us they desired a quality sling that securely held outboard motors for easy lifting or maintenance without slipping or wafting during use. The new Sling holds motors up to 15hp and is made from high performance polycarbonate woven webbing and high strength polycarbonate fasteners to protect the engine from wear and to maintain balanced holding power. For use with Barton's SkyLock Block which will lift and lock the line securely.Read moreSize 0 Stand Up Blocks
Our ever-popular Size 0 range of blocks is expanded to include 2 new standup blocks.
Our ever-popular Size 0 range of blocks is expanded to include 2 new standup blocks. Available in plain bearing and ball bearing versions, these compact blocks with 20mm sheaves are ideal for control lines, for canopy and awning manufacturers and a range of commercial applications.Read moreBarton Low Friction Rings with Dyneema Strops
Our Low Friction Rings with Dyneema Strop now have an additional size added to the range.
The Barton Low Friction Ring with loop is available in four sizes and can be used in various applications on board including barber haulers, preventers, mast base block tidies, emergency blocks, occasional blocks and tow rail blocks to name but a few of the many varied applications. The Low Friction Ring combined with the Dyneema loop gives you a fast, simple and extremely strong solution for changing the direction of a line.Read more
News
View all news
- 03 November 2025
Barton Marine Partners with Amarcord Marine Ltd to Distribute Product Range in Hungary
