Northern Light Composites (nlcomp) develops and manufactures rComposite®, a high-performance thermoplastic composite made of acrylic resin with glass, carbon or basalt fibres. It is laminated like conventional composites, but can be thermoformed, welded and recycled at end of life. From our rFactory in Monfalcone, Italy, we build hulls, decks and structural components for boatbuilders and refit yards. Recyclability claim (ISO 14021) verified by DNV. Visit our stand to see the parts up close.

Northern Light Composites

Designed by Guelfi & D'Angeli, the Offshore 34 is a boat set up to race, not to make a point. Hull, deck and structural components are laminated in rComposite®, a thermoplastic composite of acrylic resin with glass and recycled carbon fibres, over recycled and bio-based cores.

What makes it relevant to the wider industry is how it is built. rComposite® is processed by standard vacuum infusion, on standard tooling, at room temperature: no autoclave, no ovens, no new capital equipment. Hull and deck are joined with a structural adhesive chemically compatible with the matrix, so the finished boat stays within a single recyclable material family.

Recyclability is verified, not asserted. nlcomp's recyclability claim is certified against ISO 14021:2016 by DNV, and the end-of-life route has been demonstrated industrially with Composite Recycling (Switzerland): parts are dissolved to recover clean structural fibres and a monomer-rich oil, both reusable as feedstock.

Hull and deck were laminated and bonded during 2026 at the rFactory, inaugurated in July 2026. The boat is scheduled to start her first offshore season in 2027.

The shortlisting follows another recognition this autumn: in October 2026 nlcomp won the UNIDO–WTCA Global Call 2026 in Rome, in the Green Maritime Transport & Smart Ports category, with rComposite®.

"In 2022 these awards recognised a prototype. Four years later the same material is in series production on a boat customers can order," said Fabio Bignolini, CEO & Co-Founder of nlcomp. "Our aim is to show that a better-performing composite can also be recycled, on equipment every yard already has."

Visit nlcomp at Metstrade 2026 to see rComposite® parts up close.

rComposite Brochure

process-lamination-c.jpg

rComposite® is a fibre-reinforced thermoplastic composite: acrylic resin with glass, carbon or recycled fibres. It is processed with familiar lamination methods, so yards can adopt it without reinventing their workflow. Being thermoplastic, parts can be thermoformed, welded and repaired, and at end of life the material can be recycled instead of landfilled. Recyclability claim (ISO 14021) verified by DNV. Proven at full scale on our Offshore 34 yacht, built at our rFactory in Monfalcone, Italy.

rComposite

High-performance thermoplastic composite for hulls, decks and structural parts. Laminated like conventional composites, recyclable at end of life.

DSC07407 1800px.JPG

The GD34 Offshore is a 10.35 m offshore racer-cruiser designed by Guelfi & D'Angeli and built by nlcomp at the rFactory in Monfalcone, Italy. Hull, deck and structural components are vacuum-infused in rComposite®, a recyclable thermoplastic composite, and bonded with a compatible structural adhesive so the boat stays in one recyclable material family. Recyclability claim (ISO 14021) verified by DNV. Shortlisted for Sustainability Project of the Year, Boat Builder Awards 2026.

GD34 Offshore

10.35 m offshore racer-cruiser by Guelfi & D'Angeli, built in recyclable rComposite®. Shortlisted at the Boat Builder Awards 2026.

High-performance, recyclable composite components

t6E032jWXO8

Tenair

Datalayers

<noscript><iframe src="https://www.googletagmanager.com/ns.html?id=GTM-5L67WR6"
height="0" width="0" style="display:none;visibility:hidden"></iframe></noscript>

Google Tag Manager

Preference center

Cookie Bot

Log in to add this article to your reading list

Would you like to read this article again later?

Metstrade 2026

Delete Account

As soon as codes are available for this participation, they will appear here. You can then filter, copy, share and export them.

No invitation codes are available yet

Messages

The table below shows the Banner Name(s) that will appear on your stand(s). This name was provided during registration and may differ from the company name in your Company Profile. Changing your company name in the profile does not affect your Banner Name. 
If you wish to change your Banner Name, please contact Account Support.

We are working on creating more insights regarding the stands at RAI. Please visit the FAQ for more information about this topic.

Products

rComposite

High-performance thermoplastic composite for hulls, decks and structural parts. Laminated like conventional composites, recyclable at end of life.

GD34 Offshore

10.35 m offshore racer-cruiser by Guelfi & D'Angeli, built in recyclable rComposite®. Shortlisted at the Boat Builder Awards 2026.

Newsletter

Organised by

Powered by

Endorsed by

Member of

Flagship event

Strategic partner